Balboa 4239208-S Dura Jet Spa Pump 2 Speed 2.0HP 8.5 Amp 230V 48 Frame Ultima Plus
SKU BB4239208S
Original price
$449.99
-
Original price
$449.99
Original price
$449.99
$449.99
-
$449.99
Current price
$449.99
The Balboa Dura Jet Pump is a common replacement for the Balboa Ultima and Ultima Plus models due to the similar overall size of the wet end. This can make it much easier to connect to the plumbing during installation. Rated at 2.0HP, this pump is often used for both Circulation / Heating (Low Speed), as well as Therapy Jets (High Speed.)
Specifications:
- Horsepower: 2.0 HP
- Voltage: 230v
- Amps: 8.5/3.0
- Frame Size: 48
- HZ Rating: 60HZ
- Intake Size: 2" MBT (Measures 3" OD)
- Discharge Size: 2" MBT (Measures 3" OD)
- Flow Rate: 210 GPM
- Dual Speed
- Does NOT include Unions, Gaskets, or Pump Cord
This pump is labeled as 2.0 Horsepower. To properly match your existing, be sure to match the amp rating and voltage. If you have an Ultima 48-frame pump and your current amp rating (high speed) is between 7-9 amps / 230v, this is the correct match.
If your current pump has a barbed adapter connected to 3/8" vinyl tubing, and you need to replace the fitting (not included).
Also known as: DJAYGB-0001, 15-200-2201, DJAYGB-0013, DJAYGB-0113, DJAYGB-3013, DJAYGB-3113, DJAYGB-9013, DJAYGB-9113, PUUPC2152582F, 1015103, MP-130, DJAYGB-9173D DJAYGB-3162, DJAAYGB-0001B, 1055013 DJAYGB-0103, DJAYGB-3121, DJAYGB-31518H, DJAYGB-0002, DJAYGB-3151MB, DJAYGB-0101A , DJAYGB-0003, DJAYGB-3161, DJAYGB-0004, DJAYGB-9151MB, DJAYGB-0112, DJAYGB-0007, DJAYGB-3192, DJAYFB-31A3N, DJAYGB-0161, DJAYGB-9051MB, DJAYGB-0031, DJAYGB-3021, DJAYGB-0061, DJAYGB-0173-D, DJAYGB-3051MB, DJAYGB-0101, DJAYGB-3061, DJAYGB-9173D, DJAYGB-0162, DJAYFB-9115 - HP 3.0-.33SPL, DJAYGB-0003, DJAYGB-3162
Free Shipping: Orders ship within 1–2 business days unless otherwise noted. Please refer to our shipping policy for full details.
Warranty Information & Support: Visit our warranty page or refer to the specific product user manual.
Disclaimer: Professional installation (not included) is required for warranty validation.
Please Note: Images are for representation.
