Everpure EZ-RO 200 Blended Espresso Reverse Osmosis System EZRO

Everpure EZ-RO 200 Blended Reverse Osmosis System, Bladder Tank, Espresso, EZRO, 200 Gallons Per Day

Choosing the right filtration system is essential for foodservice applications to ensure a consistent, quality customer experience. The Pentair Everpure EZ-RO is all that’s needed to reduce contaminants and protect equipment with one simple system that can grow with your business.

• Applications: Espresso, Coffee
• All-in-one system includes everything you need with no additional SKUs or costs.
• Expandable system can grow as your business grows.
• Superior performance allows maximum water savings and output.
• Creates consistent, great-tasting beverages.
• Easy installation kit and easy-to-access ports make operating and servicing EZ-RO a breeze.
• Larger capacity membrane filter and tank sizes fit into the same compact EZ-RO system without having to replace the processor.
• EZ-RO can be wall-mounted, free-standing, or under the counter thanks to its space-saving, compact design.
• High-efficiency RO membrane saves up to two times more water than standard RO membranes. (Up to 50% water recovery compared to standard RO systems with up to 25% recovery.)
• EZ-RO Floor Stand Kit Available (EV315968)

Models: 

Support Documents:

• EZ-RO Sell Sheet
• EV9975-59 EZ-RO 200/2G-BL
• EV9975-60 EZ-RO 200/2G-BL
• EV9975-61 EZ-RO 200/10G-BL
• EV9975-62 EZ-RO 200/16G-BL

Common FAQs:

Which systems require electricity? What voltage is required?

Only the atmospheric tank/processor requires a power source. 120V is required.

How long does it typically take to install the EZ-RO?

Once the installation area is prepared, the EZ-RO can be installed in 45-60 minutes. Note: Install time does not include the time required to flush cartridges.

Do cartridges need to be pre-flushed?

Yes. The pre-filter and mineral cartridges must be flushed until the water runs clear. This takes about five minutes. The RO membrane must be flushed for at least one hour and, per the National Sanitation Foundation (NSF), up to 24 hours.

How far away can the tank be located from the processor?

The tank should be at most 10 feet away from the processor.

How does Pentair determine which style of tank to recommend?

The style of the tank depends on the tank size needed. The tank size depends on the amount of water a customer needs during peak hours and the RO membrane’s ability to refill the tank.

How often do the FC and CM cartridges need to be replaced?

Prefilter cartridges: every 6 months. Mineral addition cartridge: every 1 year or as needed. RO membrane cartridge: every 18 to 24 months.